 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET EPX7 EPX cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube EPX cores and accessories CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core set VALUE 0.931 255 15.4 16.5 14.5 2.1 UNIT mm -1 mm 3 mm mm 2 mm 2 g + 0.4 7.2 0 0 1.7 9 - 0.4 0.1 2.3 0 3.4- 0.2 EPX7 7.5 0 - 0.2 9.4 0 - 0.4 Dimensions in mm. + 0.4 4.6 0 MFP001 Fig.1 EPX7 core set. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 30 10 N. GRADE 3C94 3C96 3F35 AL (nH) 1950 25 % 1750 25 % 1400 25 % e 1440 1300 1040 AIR GAP (m) 0 0 0 TYPE NUMBER EPX7-3C94 EPX7-3C96 EPX7-3F35 Core sets for filter applications Clamping force for AL measurements, 30 10 N. GRADE 3B46 AL (nH) 2500 25 % e 1850 AIR GAP (m) 0 TYPE NUMBER EPX7-3B46 2008 Sep 01 720 Ferroxcube EPX cores and accessories Core sets of high permeability grades Clamping force for AL measurements, 30 10 N. GRADE 3E55 AL (nH) 63 3 % 100 3 % 160 3 % 250 5 % 315 5 % 400 8 % 8400 + 40 / - 30 % 3E6 9300 + 40 / - 30 % e 47 74 119 185 233 296 6220 6890 AIR GAP (m) 450 250 150 90 70 50 0 0 EPX7 TYPE NUMBER EPX7-3E55-A63 EPX7-3E55-A100 EPX7-3E55-A160 EPX7-3E55-A250 EPX7-3E55-A315 EPX7-3E55-A400 EPX7-3E55 EPX7-3E6 Properties under power conditions B (mT) at GRADE H = 250 A/m; f = 10 kHz; T = 100 C 320 340 300 f = 100 kHz; B = 100 mT; T = 100 C 0.02 0.015 - CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 100 C 0.13 0.1 - f = 500 kHz; B = 50 mT; T = 100 C - 0.08 0.03 f = 500 kHz; B = 100 mT; T = 100 C - - 0.25 3C94 3C96 3F35 2008 Sep 01 721 Ferroxcube EPX cores and accessories COIL FORMERS General data PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION EPX7 Sumikon PM9630 (PF), glass-reinforced, flame retardant in accordance with "UL 94V-0"; UL file number E41429(M) copper-tin alloy (CuSn), nickel flash, gold plated 180 C, "IEC 60085", class H "IEC 60068-2-20", Part 2, Test Tb, method 1B, 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1, 235 C, 2 s 0 7.1- 0.2 0 4.55 - 0.15 + 0.15 3.45 0 0 4.5- 0.1 3.1 min. 2 + 0.15 5.95 0 0.8 11 ref. 0 7.05- 0.15 8.6 2.5 0.6 2 6 0 9.4- 0.2 0.6 0.3 0.05 7.5 0.1 0 9 - 0.5 10.7 0.2 12.4 0.2 1.2 MFP010 Dimensions in mm. Fig.2 EPX7 coil former: 8-pads, 2 mm pad distance. Winding data and area product for 8-pads EPX7 coil former NUMBER OF SECTIONS 1 WINDING AREA (mm2) 3.64 NOMINAL WINDING WIDTH (mm) 3.4 AVERAGE LENGTH OF TURN (mm) 23.3 AREA PRODUCT Ae x Aw (mm4) 60.1 TYPE NUMBER CSHS-EPX7-1S-8P-T 2008 Sep 01 722 Ferroxcube EPX cores and accessories General data CSHS-EPX7-1S-8P PARMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION EPX7 Sumikon PM9630 (PF), glass-reinforced, flame retardant in accordance with "UL 94V-0"; UL file number E41429(M) copper-tin alloy (CuSn), nickel flash, gold plated 180 C, "IEC 60085", class H "IEC 60068-2-20", Part 2, Test Tb, method 1B, 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1, 235 C, 2 s 0 7.1- 0.2 0 4.55 - 0.15 + 0.15 3.45 0 0 4.5- 0.1 3.1 min. 2.54 + 0.15 5.95 0 0.8 11 ref. 0 7.05- 0.15 8.6 2.5 0.6 2.54 7.62 0 9.4- 0.2 0.8 0.3 0.05 7.5 0.1 0 9 - 0.5 10.7 0.2 12.4 0.2 1.2 MFP013 Dimensions in mm. Fig.3 EPX7 coil former: 8-pads, 2.54 mm pad distance. Winding data and area product for 8-pads EPX7 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 3.64 NOMINAL WINDING WIDTH (mm) 3.4 AVERAGE LENGTH OF TURN (mm) 23.3 AREA PRODUCT Ae x Aw (mm4) 60.1 TYPE NUMBER CSHS-EPX7-1S-8P 2008 Sep 01 723 Ferroxcube EPX cores and accessories MOUNTING PARTS General data ITEM Mounting clamp REMARKS stainless steel (CrNi); to be used in combination with CSHS-EPX7-1S-8P or CSHS-EPX7-1S-8P-T EPX7 FIGURE TYPE NUMBER 4 CLM-EPX7 0.3 0.05 7 9.4 0.1 0.2 7 0.2 9 0.1 10.5 0.2 6.5 0.15 MFW052 6 0.15 Dimensions in mm. Fig.4 Mounting clamp CLM-EPX7. 2008 Sep 01 724 Ferroxcube EPX cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS EPX7 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 725 |
Price & Availability of EPX7-3C94
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |